$50 OFF

Blown Fuses

Do you know what happens when a fuse blows out in a circuit? Blown fuses are short circuits that have occurred within the electrical system. Sometimes these fuses melt or blow due to lack of maintenance or use.

This may cause a continuous flow of current that damages other parts of the circuit and also causes heat buildup. When this happens, the fuses blow open to allow for the safe removal of the power supply wire.

A fuse is located in circuit breakers as a safety measure and is assumed to blow if the conditions against which it is guarded are violated.

There are many reasons for fuses to blow quickly and caused lost power to the fuse box. The circuit on the electrical panel may have a trigger to delay the power cut-off.

If you are looking for a professional electrician, Electrability should be the first name that comes to your mind. We will come to you right away and replace the fuse and make sure it is working properly.

Image presents Blown Fuses
lifetime warranty

BOOK NOW - Get $50 OFF

Reliable & Fast

We Charge per Job, Not per Hour

Do you know what happens when a fuse blows out in a circuit? Blown fuses are short circuits that have occurred within the electrical system. Sometimes these fuses melt or blow due to lack of maintenance or use.

This may cause a continuous flow of current that damages other parts of the circuit and also causes heat buildup. When this happens, the fuses blow open to allow for the safe removal of the power supply wire.

A fuse is located in circuit breakers as a safety measure and is assumed to blow if the conditions against which it is guarded are violated.

There are many reasons for fuses to blow quickly and caused lost power to the fuse box. The circuit on the electrical panel may have a trigger to delay the power cut-off.

If you are looking for a professional electrician, Electrability should be the first name that comes to your mind. We will come to you right away and replace the fuse and make sure it is working properly.

Image presents Blown Fuses
Image presents Blown Fuses

What does the term "Blown Fuse" mean?

A blown fuse refers to a non-functional fuse in the switchboard, which occurs when it is overloaded or a short circuit happens.

Fuses are safety devices that interrupt the flow of electricity to protect against damage or hazards.

Traditional “plug-in” fuses may have limitations, as they take time to react and require specific grade fuse wires.

Modern alternatives like circuit breakers and RCDs provide rapid and reliable protection, reacting within milliseconds to ensure safety against electrical faults and hazards.

Don’t Know How To Replace A Blown Fuse?

If you don’t know how to replace a blown fuse, it’s a good idea to contact our fully licensed and expert electricians to do the job properly.

If there is a blown fuse, unplug all the electrical appliances and turn off all the lights in the house. Before doing any electrical repairs make sure your hands are dry.

Turn off the main power switch in the utility room. Our qualified electricians will make sure that the amperage rating matches exactly. 

When the new circuit breaker still trips, test the wiring by plugging in some appliances and making sure they function properly.

If everything works, then it’s probably just a bad wire somewhere; if not, it’s time to get an experienced electrician out to check the wiring.

Image presents How To Replace A Blown Fuse?
Image presents Blown Fuse Replacement Cost

Blown Fuse Replacement Cost

If you want to know how much a blown fuse replacement costs call us now on 1300 004 918.

When something goes wrong in your home or office, you want fast service. Electrability understands this and provides efficient workmanship using the highest quality products available.

With significant years of experience in the industry, we have completed many projects large and small. Our staff consists of master electricians who can handle the most complex jobs.

When you choose Electrability, you’ll receive superior customer care, competitive pricing and reliable results every time.

We offer same-day service, free estimates and provide blown fuse replacements at competitive prices!

We have a team of highly skilled electricians that are ready to assist you with all your electrical wiring problems. So, If you ever encounter any signs of home electrical problems, please do not hesitate to contact us at Electrability Sydney.

Reasons Why Does Fuse Blow?

Cause of a Blown Fuse: The most common reason for a blown fuse is the overload of a specific circuit, often due to operating multiple appliances simultaneously. This typically occurs when using a power board or a multiple outlet adapter connected to a single wall power point.

Blown Fuse due to Moisture or Water: Another cause of a blown fuse is when an appliance or power point outlet comes into contact with moisture or water, resulting in a short circuit. If this happens, it is essential to turn off the power point and disconnect the appliance from the wall plug.

If the fuse continues to blow or the circuit breaker requires frequent resetting, it is advisable to contact an Alliance Climate Control technician for an emergency visit.

Common Causes of Blown Fuses: Some common causes of blown fuses or tripped circuit breakers include:

  • Using too many appliances simultaneously while connected to a single power outlet.
  • Faults in appliances, such as broken or exposed wires.
    Damaged wall or light switch housing, often accompanied by crackling sounds.
  • Water entering a wall-mounted power point or dripping onto bare wires behind the wall.

In case of a blown fuse or electrical issues, Get in touch with our professional electricians to ensure your safety and prevent further blown fuses damage.

Preventing Blown Fuses: Tips for a Safer Electrical System

Avoid Overloading Circuits: To prevent blown fuses or tripped circuit breakers, be cautious of overloading circuits with too many appliances. Look out for heat discoloration on power points or power boards, as it may indicate excessive heat buildup.

If detected, redistribute some appliances to different circuits or stagger appliance usage to reduce the load.

Address Faulty Appliances: If you notice sparking or blackening around the area where wires enter an appliance, it indicates a broken or damaged wire. In such cases, immediately turn off the power point and disconnect the appliance. It is crucial not to reconnect it until a professional has examined and repaired it.

Our skilled Electrability technicians are available to assess any appliance concerns, prioritizing your safety.

Keep Water and Electricity Separate: Water and electrical power should never mix. Take preventive measures to avoid moisture entering electrical power outlets. Ensure power points in wet areas like bathrooms and kitchens are positioned well away from areas where water might accumulate.

Additionally, any moisture leakage from pipes behind walls could lead to catastrophic consequences if it drips onto a power point. While such instances are rare, seeking professional advice is essential if this situation arises.

Seek Professional Assistance: At Electrability, our team of dedicated electricians is available to assist you 24/7. With our radio-controlled vans, we can promptly reach your Sydney location to address any blown fuse concerns. Feel free to reach out to us at any time for reliable and efficient service.

By following these guidelines and prioritizing safety, you can minimize the risk of blown fuses and maintain a safer electrical system in your home.

Our Blown Fuses Services

Blown Fuse Diagnosis

Electrability electricians can accurately identify the cause of a blown fuse and determine if there are any underlying electrical issues.

Electrical System Inspection

We can conduct a comprehensive inspection of the electrical system to identify any potential hazards or issues that may lead to blown fuses.

Wiring Repairs

If faulty wiring is causing blown fuses, our electricians can repair or replace the damaged wiring to restore proper electrical functioning.

Fuse Replacement

Our electricians can safely replace blown fuses with the appropriate size and type to ensure proper electrical protection for your home.

Electrical Panel Upgrades

If the electrical panel is outdated or unable to handle the electrical load, our electricians can perform panel upgrades to prevent future blown fuses.

Electrical System Maintenance

Our electricians offer routine maintenance services to ensure the electrical system is in optimal condition, reducing the likelihood of blown fuses.

Circuit Evaluation

Electricians at Electrability can assess the circuits connected to the blown fuse to determine if any repairs or upgrades are needed.

Circuit Breaker Installation

Our electricians can install circuit breakers as a more efficient alternative to fuses, providing better protection against electrical overloads.

Electrical Safety Consultation

Electricians at Electrability can provide guidance on electrical safety practices and offer recommendations to prevent future blown fuses and electrical hazards.

Types of Tasks Performed When Doing Blown Fuses Repair Services

  • Diagnosis and Troubleshooting
  • Power Shutdown
  • Fuse Replacement
  • Wiring Inspection and Repair
  • Component Testing
  • Overload Assessment
  • Circuit Integrity Testing
  • Documentation and Reporting
  • Cleanup and Site Restoration

Frequently Asked Questions

It takes less than five minutes to replace a blown fuse. Our professional electricians can do this job quickly and efficiently.

Blown fuses occur when an electrical circuit has too much current flowing through it. The fuse will blow before the wire melts, which means that the fuse must be replaced before the wire burns out.

The most common cause of blown fuses is overheating. Overheated wires may melt, causing them to stick together and short-circuit. Another possible cause of blown fuses includes faulty wiring. Faulty wiring could include loose connections, damaged insulation, or exposed metal parts.

You can also read our blog about “What causes transformer fuses to blow” for added information.

A fuse is an electrical component that protects wires against excessive current flow. A breaker is a switch used to turn off power to a circuit when too much current flows through it.

The best way to know when to replace your fuses is to call an electrician to inspect your circuit breaker panel. They will be able to tell you whether or not your fuses need replacing.

A blown fuse lasts approximately 30 seconds. The longer the fuse is left burning, the more likely it is to burn out completely.

When you’re in need of an electrician to address blown fuses near your location, Electrability is here to help. Visit our website or contact us directly to find a qualified electrician near you. Trust Electrability to handle your blown fuse concerns efficiently and reliably.

WE TAKE CARE OF ALL YOUR BLOWN FUSES REPAIR PROBLEMS

Electrability provides swift solutions for blown fuses repair issues, restoring power and safeguarding your electrical system.